FIELD OF APPLICATION
Used for acoustic, vibration insulation of vehicles; in ventilation systems of trading spaces, production facilities, public spaces, communication lines.
High degree of noise- vibro protection
Flame-free method of installation
The technical
lifetime is 25-
30 years
Resistance to mechanical influences, temperature changes
DESCRIPTION
RIZOLIN Sound Insulation is a self-adhesive bitumen-polymeric material with an additional sound insulation made of foamed polyethylene. The material is waterproof, resistant to vibrations and mechanical influences, bioresistant.
Can be applied in all climatic zones (according to SNiP 23-01-99).
METHOD OF INSTALLATION
(according to «Guideline for installation of acoustic insulation with rolled waterproofing material «RIZOLIN»)
To apply Rizolin Sound Insulation it is enough to take off a release film, press the material to a dry and degreased surface and roll it down with a roller. Track beds are laid in seams, with the bitumen and polymeric side to the base.
ATTENTION: Self-adhesive material properties retain at an air temperature above +10°С. If faulty adhesion has occurred the material can be heated from adhesive side till appearance of high luster.
Basic physical and mechanical characteristics of the material Rizolin Sound Insulation — U
Thickness, mm
2. ± 0,15
Breaking force under tension in longitudinal/transverse directions, not less
800/900
Adhesive strength, not less, kN/m
— from steel surface
1,5
1,0
0,5
— from concrete surface
— from wooden surface
Thermal resistance within 2 hours in the upright position,°С, not less
+70 ÷ +80
Radius of curvature temperature (25±2) mm, °С, not above
-25
Water absorption, %
1
Self-adhesive properties of the material, °С, not less
+15
Operating temperature, °С
-50 ÷ +50
Dynamic modulus of elasticity under 2 kPa, MPa not above
0,5
Level recession index of impact sound ∆ḺP dB, not less
20
Thermal conductivity, not above, W/m deg
0,037
Waterproofing under a pressure not less than 0,01 kgf/ cm2 within not less than 72 hours/td>
absolute
Waterproofing under a pressure not less than 0,5 MPa within 10 min.
Contact us via : mail@rizolin.ru
RIZOLIN Sound Insulation – U
RIZOLIN Sound Insulation – U
FIELD OF APPLICATION
Used for acoustic, vibration insulation of vehicles; in ventilation systems of trading spaces, production facilities, public spaces, communication lines.
High degree of noise- vibro protection
Flame-free method of installation
The technical
lifetime is 25-
30 years
Resistance to mechanical influences, temperature changes
DESCRIPTION
RIZOLIN Sound Insulation is a self-adhesive bitumen-polymeric material with an additional sound insulation made of foamed polyethylene. The material is waterproof, resistant to vibrations and mechanical influences, bioresistant.
Can be applied in all climatic zones (according to SNiP 23-01-99).
METHOD OF INSTALLATION
(according to «Guideline for installation of acoustic insulation with rolled waterproofing material «RIZOLIN»)
To apply Rizolin Sound Insulation it is enough to take off a release film, press the material to a dry and degreased surface and roll it down with a roller. Track beds are laid in seams, with the bitumen and polymeric side to the base.
ATTENTION: Self-adhesive material properties retain at an air temperature above +10°С. If faulty adhesion has occurred the material can be heated from adhesive side till appearance of high luster.
Basic physical and mechanical characteristics of the material Rizolin Sound Insulation — U
1,0
0,5
USED IN SOLUTIONS:
SELECT SOLUTION:
SELECT MATERIAL: