FIELD OF APPLICATION
Single-layer installation and reparation of , ; houses of worship domes, , cottages, townhouses.
PREMIUM class material
Flame-free method of application
Technical
lifetime is 25-
30 years
Resistance to aggressive environment
DESCRIPTION
Rizolin FSm- is PREMIUM CLASS material. It is made of durable reinforcing fiberglass cloth impregnated with bitumen-polymeric compound with a protective copper foil layer.
The material is absolutely waterproof, resistant to rapid temperature changes. Due to protective copper foil layer the material is resistant to ultraviolet impact and corrosive environment that allows to maintain its waterproofing properties permanently. During the usage, the copper surface will be covered with a patina that gives the building a noble look.
Can be used in all climatic zones (according to SNiP 23-01-99).
METHOD OF INSTALLATION
(according to «Guideline for installation of roofs with self-adhesive rolled waterproofing material «RIZOLIN»)
The material is easy in application and does not require any special equipment. To apply Rizolin FSm one must only take off the release film, place the material onto a dry, dust-free surface and roll it down with a roller.
ATTENTION: Self-adhesive material properties retain at an air temperature above +15 °С. At lower temperatures a little heat must be applied to the adhesive side till the appearance of high luster in order to ensue the adhesiveness.
DO NOT heat the material from foil side!
Basic physical and mechanical characteristics of the material RIZOLIN FSm
Thickness, mm
2,0 ± 0,15
Breaking force under tension in longitudinal/transverse directions, not less
1100/1100
Adhesive strength, not less, kN/m
— from steel surface
1,5
— from concrete surface
1,0
— from wooden surface
0,5
Thermal resistance within 2 hours in the upright position, °С not less
+70 ÷ +80
Radius of curvature temperature (25±2) mm, °С, not above
-20
Water absorption, less than %
1
Operating temperature, °С
-50 ÷ +50
Vapor resistance, less than mg/(m*h*Pa)
20
Waterproofing under a pressure not less than 0,2 MPa within 2 hours
absolute
Waterproofing under a pressure not less than 0,5 MPa within 10 min.
RIZOLIN FSm
RIZOLIN FSm
FIELD OF APPLICATION
Single-layer installation and reparation of , ; houses of worship domes, , cottages, townhouses.
PREMIUM class material
Flame-free method of application
Technical
lifetime is 25-
30 years
Resistance to aggressive environment
DESCRIPTION
Rizolin FSm- is PREMIUM CLASS material. It is made of durable reinforcing fiberglass cloth impregnated with bitumen-polymeric compound with a protective copper foil layer.
The material is absolutely waterproof, resistant to rapid temperature changes. Due to protective copper foil layer the material is resistant to ultraviolet impact and corrosive environment that allows to maintain its waterproofing properties permanently. During the usage, the copper surface will be covered with a patina that gives the building a noble look.
Can be used in all climatic zones (according to SNiP 23-01-99).
METHOD OF INSTALLATION
(according to «Guideline for installation of roofs with self-adhesive rolled waterproofing material «RIZOLIN»)
The material is easy in application and does not require any special equipment. To apply Rizolin FSm one must only take off the release film, place the material onto a dry, dust-free surface and roll it down with a roller.
ATTENTION: Self-adhesive material properties retain at an air temperature above +15 °С. At lower temperatures a little heat must be applied to the adhesive side till the appearance of high luster in order to ensue the adhesiveness.
DO NOT heat the material from foil side!
Basic physical and mechanical characteristics of the material RIZOLIN FSm
corporate logo
USED IN SOLUTIONS:
SELECT SOLUTION:
SELECT MATERIAL: