FIELD OF APPLICATION
The material is used for water-, sound-, thermal insulation of the floor construction of accommodation units, trading spaces, production facilities; it is also used as multi-purpose adhesive base , , on the concrete, metal, wooden, OSB, PVC and other kinds of underflooring.
Application of Rizolin FLOOR-A gives an opportunity to cut down on labor costs and significantly increase speed of final floor covering application (up to 15m2 per hour!!!).
Multi-purpose adhesive base
Reliable waterproofing
The technical lifetime is
50 years
High adhesion degree to all kinds of bases
DESCRIPTION
Rizolin FLOOR-A- is a rolled material, adhesive from both sides. It is made of bitumen-polymeric compound based on durable reinforcing fiberglass cloth. Adhesive sides of the material are protected against adhesion by release film. The material is waterproof, resistant to mechanical influences, bioresistant.
Can be used in all climatic zones (according to SNiP 23-01-99).
METHOD OF INSTALLATION
(according to «Guideline for installation of floors with self-adhesive rolled waterproofing and sound insulation material «Rizolin FLOOR»)
The material is easy in application and does not require any special equipment. Track beds are laid into seams on a dry dust-free surface. For better waterproofing seams are filled with self-adhesive sealing tape Rizolin AS-100. For final floor covering application it is necessary to take off the protective release film from the upper adhesive layer of the cloth.
ATTENTION: The works with the material can be done at an average daily temperature above +10°С. At lower temperatures (up to -10°С) it is recommended to heat the material a little with a heat gun from the adhesive side till the appearance of high luster.
Basic physical and mechanical characteristics of the material Rizolin Floor A
Item
Rizolin Floor A
Roll length/width, m.
10/1 ± 0,4
Binder layer thickness, mm.
3 ± 0,2
Breaking force under tension in longitudinal/transverse directions, not less
700/600
Dynamic modulus of elasticity under load 2 kPa, Mpa, not above
0,5
Radius of curvature temperature (25±2) mm, °С, not above
-15
Water absorption within 24 hours, %, not more
1
Operating temperature, °С
-50 ÷ +50
Waterproofing under a pressure not less than 0,01 kgf/ cm2 within not less 72 hours
Contact us via : mail@rizolin.ru
RIZOLIN FLOOR-A
RIZOLIN FLOOR-A
FIELD OF APPLICATION
The material is used for water-, sound-, thermal insulation of the floor construction of accommodation units, trading spaces, production facilities; it is also used as multi-purpose adhesive base , , on the concrete, metal, wooden, OSB, PVC and other kinds of underflooring.
Application of Rizolin FLOOR-A gives an opportunity to cut down on labor costs and significantly increase speed of final floor covering application (up to 15m2 per hour!!!).
Multi-purpose adhesive base
Reliable waterproofing
The technical lifetime is
50 years
High adhesion degree to all kinds of bases
DESCRIPTION
Rizolin FLOOR-A- is a rolled material, adhesive from both sides. It is made of bitumen-polymeric compound based on durable reinforcing fiberglass cloth. Adhesive sides of the material are protected against adhesion by release film. The material is waterproof, resistant to mechanical influences, bioresistant.
Can be used in all climatic zones (according to SNiP 23-01-99).
METHOD OF INSTALLATION
(according to «Guideline for installation of floors with self-adhesive rolled waterproofing and sound insulation material «Rizolin FLOOR»)
The material is easy in application and does not require any special equipment. Track beds are laid into seams on a dry dust-free surface. For better waterproofing seams are filled with self-adhesive sealing tape Rizolin AS-100. For final floor covering application it is necessary to take off the protective release film from the upper adhesive layer of the cloth.
ATTENTION: The works with the material can be done at an average daily temperature above +10°С. At lower temperatures (up to -10°С) it is recommended to heat the material a little with a heat gun from the adhesive side till the appearance of high luster.
Basic physical and mechanical characteristics of the material Rizolin Floor A
USED IN SOLUTIONS:
SELECT SOLUTION:
SELECT MATERIAL: